US 2 at the top of Stevens Pass. This page puts WSDOT's cameras and its closure and crash reports for that road on one map. Washington publishes no plow positions, and the page says so instead of guessing. The resort's own snow report covers the mountain itself.
The cameras on US 2 along the way up, plus any others within 15 miles, nearest to the base first. Tap one to find it on the map.
Plow trucks are not shown because WSDOT does not publish where its plows are. For the states and provinces that do, see the snowplow map. Closures and crashes are in the next box.
WSDOT reports on US 2 within 45 miles of the base, or on any road inside the 15 miles ring: full closures, crashes, weather, hazards and lane or ramp closures. Scheduled closures are marked. Nothing listed means nothing posted, not an all-clear.
Snowfall by day from the National Weather Service for the base area.
Loading the NWS forecast…
Base depth, new snow in the last 24 and 48 hours, and lifts open come from Stevens Pass itself. MileCheck has no licensed feed for the resort's numbers, so it links to them instead of copying them.
Open the Stevens Pass snow reportThe resort's own report: snowfall, lifts and runs. Opens the resort's site.
Mountain passThe pass page for the same road: cameras, restrictions and closures, with the summit weather.
Chain lawWhen chains or traction tires are required on Washington highways, and the fines where the law states them.
CamerasEvery WSDOT camera on one map, with the route and mile marker where the DOT gives one.
Road conditionsEvery closure and crash WSDOT is publishing, statewide.
Official sourceWashington's traveler information site. The list of record for closures, restrictions and detours.
WSDOT publishes its cameras and its closure and crash reports, and that is what this page shows. It does not publish where its trucks are, so no page can show that for Washington. The closure list is WSDOT's own feed, read every five minutes and converted to the format MileCheck uses for every state. A quiet list means WSDOT has posted nothing for these roads, which is different from a road being open.
The 15 miles ring is the search area for trucks and cameras. A truck reporting on US 2 is kept out to 45 miles from the base, the stretch a driver is actually on; anything inside the ring is kept whatever road it is on, so a truck on a side road near the base still shows. The resort's own snow report is the source for snowfall, lifts and the parking lots.
The map shows every closure and crash WSDOT is publishing on US 2 as a red or orange marker, and the list under it says when the DOT last updated each one. No marker means WSDOT has not posted a closure, not that the road is open. It reloads every five minutes. For the official word, open WSDOT.
WSDOT does not publish its trucks' positions. Seventeen states and provinces do, and the snowplow map shows them. For Washington, the cameras and the WSDOT reports on this page are what exists.
Chain and traction requirements are set by WSDOT per road and per storm, and they show up in the WSDOT feed as restrictions, which this page lists when they are on US 2. Washington's chain law explains the levels and who they apply to. Always follow the posted signs.
Plow positions every minute, closures and crashes every five minutes, the camera list every ten. MileCheck's server reads the WSDOT and WSDOT feeds and converts them to one format. Each truck and each alert carries its own time stamp from the DOT, shown next to it.
MileCheck shows your mile marker and the WSDOT alerts ahead of you on US 2, offline in dead zones, on CarPlay and Android Auto. Premium starts with a trial.
The Monthly Highway Report
Closures, crashes and roadwork from the state road feeds, once a month in your inbox. See the October report. No spam.