US 2 or US 97 into Wenatchee, then Squilchuck Road (a county road) for 12 miles. This page puts WSDOT's cameras and its closure and crash reports for that road on one map. Washington publishes no plow positions, and the page says so instead of guessing. The resort's own Mission Ridge mountain report covers the mountain itself. WSDOT cameras cover the highways into Wenatchee. Squilchuck Road is county-maintained and has no DOT feed.
Washington publishes no plow positions. WSDOT does not put its trucks on a public feed, so no page can show them. Here is what WSDOT does publish:
The cameras above are the ones within 20 miles of the base, nearest first. Closures and crashes are in the next box. For the states and provinces that do publish trucks, see the snowplow map.
WSDOT reports on US 2, US 97, SR 28 within 60 miles of the base, or on any road inside the 20 miles ring: full closures, crashes, weather, hazards and lane or ramp closures. Scheduled closures are marked. Nothing listed means nothing posted, not an all-clear.
The resort's own report: snowfall, lifts and runs. Opens the resort's site.
Chain lawWhen chains or traction tires are required on Washington highways, and the fines where the law states them.
CamerasEvery WSDOT camera on one map, with the route and mile marker where the DOT gives one.
Road conditionsEvery closure and crash WSDOT is publishing, statewide.
Official sourceWashington's traveler information site. The list of record for closures, restrictions and detours.
WSDOT publishes its cameras and its closure and crash reports, and that is what this page shows. It does not publish where its trucks are, so no page can show that for Washington. The closure list is WSDOT's own feed, read every five minutes and converted to the format MileCheck uses for every state. A quiet list means WSDOT has posted nothing for these roads, which is different from a road being open.
The 20 miles ring is the search area for trucks and cameras. A truck reporting on US 2, US 97, SR 28 is kept out to 60 miles from the base, the stretch a driver is actually on; anything inside the ring is kept whatever road it is on, so a truck on a side road near the base still shows. The resort's own Mission Ridge mountain report is the source for snowfall, lifts and the parking lots. WSDOT cameras cover the highways into Wenatchee. Squilchuck Road is county-maintained and has no DOT feed.
The map shows every closure and crash WSDOT is publishing on US 2, US 97, SR 28 as a red or orange marker, and the list under it says when the DOT last updated each one. No marker means WSDOT has not posted a closure, not that the road is open. It reloads every five minutes. For the official word, open WSDOT. WSDOT cameras cover the highways into Wenatchee. Squilchuck Road is county-maintained and has no DOT feed.
WSDOT does not publish its trucks' positions. Seventeen states and provinces do, and the snowplow map shows them. For Washington, the cameras and the WSDOT reports on this page are what exists.
Chain and traction requirements are set by WSDOT per road and per storm, and they show up in the WSDOT feed as restrictions, which this page lists when they are on US 2, US 97, SR 28. Washington's chain law explains the levels and who they apply to. Always follow the posted signs.
Plow positions every minute, closures and crashes every five minutes, the camera list every ten. MileCheck's server reads the WSDOT and WSDOT feeds and converts them to one format. Each truck and each alert carries its own time stamp from the DOT, shown next to it.
MileCheck shows your mile marker and the WSDOT alerts ahead of you on US 2, US 97, SR 28, offline in dead zones, on CarPlay and Android Auto. Premium starts with a free trial.
The Monthly Highway Report
Your state's reported closures, crashes and roadwork, once a month by email. See the September report. No spam.
MileCheck